Fits all 2026 Kawasaki Teryx H2 Supercharged 250HP models
Part number: 108-1116
- ***MUST BE USED WITH OUR CLUTCH KIT/WEIGHTS***
- The OEM weights have a ramp end which will only cause issues with this cover and render it ineffective.
- Greatly strengthens the clutch by adding more support for the towers
- Overdrive cover allows the clutch to shift out further than factory
- This means you have much lower cruising RPM at higher speeds where the OEM setup stops shifting. It also helps clutch longevity by having a higher shift ratio, so you are not sitting in the same place on the clutch arm/clutch sheaves as long.
- Higher Top Speed: Top speed increases will greatly depend on vehicle load vs power, but normally 3-5 MPH extra can be seen with this overdrive cover.
- This cover is a big factor when clutching for a higher shift out RPM which gives you more power. Many times with higher RPM clutching you will see a slightly lower top speed as you hit the rev limit quicker. This overdrive cover will bring that back in most cases.
- Extensively tested to ensure it’s the strongest cover on the market
- The OEM cast aluminum spring cover can easily break/crack under high RPM, belt slip, or even when tightening the bolts; especially using power tools. Since our cover plate is much stronger billet material, this would not be able to happen.
- We ran this at 9,500 to 10,000 RPM before the recall clutch for many test periods and miles without issue.
- Easy bolt-on piece that does not change spring rate; simply remove your factory cover and bolt this one in place
- CNC machined from 6061 aluminum in the USA